Homepage
Anatomically shaped pads
Note: For proper fastening of shaped adult diapers, fixing pants of the correct size are required.
The shaped adult diaper must be activated before fitting:
Unfold the product, gently stretch it, and fold it in half lengthwise.
Note: Do not twist the product.
By activating the product, the absorbent core will become fluffier and better prepared for absorption.
Fitting the product on a standing person — independently or with the help of a caregiver
Pull the mesh pants down to mid-thigh.
Place the previously activated shaped adult diaper between the legs. Remember that the wider part of the diaper is the back, and the narrower part should be at the front (for Seni San for Men, the wider part should be at the front).
Pull up the mesh pants and adjust the product so it fits snugly against the body.
Ensure the product is fitted evenly, symmetrically, and comfortably; adjust if necessary.
If you need to use the toilet and the product is still dry, pull down the fixing pants together with the diaper, use the toilet, and put them back on.
Note: You can insert the diaper from the front or from the back – to relieve your back, choose the method that is more comfortable for you in a given situation. Provide the assisted person with the opportunity to lean on something, e.g., a cabinet or a washbasin. The assisted person can help with fitting the shaped adult diaper by holding it at the front on their lower abdomen.
Fitting the product on a lying person
Stand at the edge of the bed and pull the mesh pants down to the assisted person's mid-thigh. Bend one of the patient's legs at the knee.
Note: If you are standing on the patient's right side, bend their left leg; if you are standing on their left side – bend their right leg.
Turn the patient onto their side and, after performing care activities, place the previously activated shaped adult diaper between their legs.
Note: The wider part of the diaper is the back, and the narrower part should be at the front (for Seni San for Men - the wider part is the front of the product). You can insert the diaper from the front or from the back – to relieve your back, choose the method that is more comfortable for you in a given situation.
Spread the back part of the shaped adult diaper so that it fits well against the body, and the wetness indicator is aligned with the spine. Pull up the mesh pants at the back. Pull out the front part of the shaped adult diaper, fit it to the crotch. Turn the patient onto their back and, slightly lifting them from the left and right sides, pull up the mesh pants. Roll up the used shaped adult diaper and dispose of it in a waste bin. Do not flush the used product down the toilet.