Homepage
Diapers with hip bands
Diapers with a waist belt should be activated before application:
- Remove the diaper from the packaging.
- Unfold the product, grasp it by both ends and gently pull, then fold it lengthwise in half.
Note: Do not twist the product.
Thanks to the product's activation, the absorbent core will become fluffier and better prepared for absorption.
Applying while standing – independently or with a caregiver's help
Place the previously activated diaper against the buttocks with the absorbent part, so that the waist belts are at the top. Wrap the belts around the hips, starting from the left side. The belt on the right side has a hook-and-loop fastener, which you can use to adjust the diaper's waist circumference.
Note: the waist belt should be well-fitted – it should not dig into the skin, nor be too loose.
After securing the right belt with the hook-and-loop fastener, pull the diaper between the legs to the front. Secure the front of the diaper to the waist belt using two hook-and-loop fasteners. Ensure that the diaper fits snugly against the body but does not dig into the groin and that the inner cuffs are not rolled up.
Note: if necessary, the front of the diaper can be detached and reattached.
Roll up the used product and dispose of it in a trash can. Do not flush the used product down the toilet.
Applying to a lying person
Stand at the edge of the bed and bend one of the patient's legs at the knee.
Note: if you are standing on the patient's right side, bend their left leg; if you are standing on their left side – bend their right leg.
Turn the patient onto their side towards you, and after performing care procedures, place the previously activated product under the patient from behind. Slowly lay the patient onto the diaper. Adjust the waist belts to the patient's hips. Start with the left belt, then adjust the belt on the patient's right side and secure it using the hook-and-loop fastener located at the end of the belt.
Note: the waist belt should be well-fitted – it should not dig into the skin, nor be too loose.
Pull the front part of the diaper and fit it to the crotch. Secure the diaper to the belt using two hook-and-loop fasteners located on the front part of the product. Ensure that the diaper fits snugly against the body but does not dig into the groin and that the inner cuffs are not rolled up.
Note: if necessary, the front of the diaper can be detached and reattached.
Roll up the used product and dispose of it in a trash can. Do not flush the used product down the toilet.